Research & Development

Design Center

A team expanding the boundaries of engineering with Ministry-approved R&D center status since 2018.

Who We Are

Our Engineering Team

ATM has had a Design Center approved by the Ministry of Industry and Technology since 2018. In this department, intensive studies are carried out on both Machinery Manufacturing and Heat Transfer.

We actively use government supports in our work and closely follow advanced machine technologies in the world.

Our qualified staff continuously work on new machines and solutions, advancing their experience and knowledge every day. We are in constant cooperation with Technical High Schools and Universities; we continuously produce solutions for the companies we work with in the areas of improvement and cost reduction.

Our colleagues consist of Mechanical Engineers, Design Engineers, Mechatronics and IT engineers, and experienced technical staff.

  • Design Center

    Approved by the Ministry of Industry and Technology since 2018

  • Two Focus Areas

    Machinery Manufacturing + Heat Transfer Technologies

  • Government Supports

    KOSGEB and TÜBİTAK project financing

  • University Collaboration

    Continuous collaboration with technical high schools and universities

KOSGEB & TÜBİTAK

R&D Projects

Projects supported by national institutions, providing solutions to real production problems in the field.

2008
7081055

Vertical machine development study for condenser manufacturing

2010
7100526

Design and development of layered condenser production line

2012
3120174

3-axis and end-formed tube production line project

2013
3130735

High-efficiency condenser surface cleaning and painting line design and development project

2017
3170335

Development of a low waste rate production line for easy-to-clean and thermally improved condenser systems used in cooling systems

2023
3231599

Development of capillary copper tube drawing product, a first on a national level

Ministry Approved

Design Center Projects

Innovation projects carried out and successfully completed in our Design Center approved by the Ministry of Industry and Technology.

Project CodeProject NameStart DateEnd Date
ATM-100101Domestic air conditioning units heat exchangers and connection tubes01.201805.2019
ATM-100102Beverage service machines heat exchangers12.201705.2019
ATM-100103Commercial refrigerator sector heat exchanger12.201705.2019
ATM-100104Heat exchangers and components for ice and ice cream machines01.201811.2018
ATM-100105Tumble dryer battery heat exchanger01.201806.2019
ATM-100106Series-connected, high heat exchange capacity condensers10.201707.2019
ATM-100107Cold Room Split Condenser Unit10.201712.2018
ATM-02Dust-free condenser development study05.200903.2010
ATM-03Fan condenser design for domestic refrigerators10.201507.2017
ATM-04Development of vertical deep freezer shelf evaporator design05.201612.2016
ATM-100108Split condenser unit designs customized for industrial environment needs12.201804.2020
ATM-100109Inverter type air conditioning units heat exchangers and connection tubes12.201804.2020
ATM-100110Heat exchanger designs for new type beverage service machines according to customer needs12.201812.2020
ATM-100111High cooling capacity, compact and low-cost condenser design12.201812.2020
ATM-100112Low Volume High Capacity Air Handling Unit Condensers12.201912.2022
ATM-100113Low Volume High Efficiency Water system heating/cooling heat exchangers12.201903.2022
ATM-100114Design of heat exchanger systems for Trucks, Buses and Minibuses12.201912.2022
ATM-100115Coaxial evaporator designs for heatpump systems12.202003.2025
ATM-100116Coaxial condenser designs for heatpump systems12.202003.2025
ATM-100117Design of heat exchangers with -90°C cooling capacity for chemical and biological material storage cabinets12.202012.2021
ATM-100118Low volume high efficiency condenser system designs suitable for R290 gas12.202012.2022
ATM-100119Design of zero / very low leak rate cooling system connection parts for truck trailer cooling system12.202103.2025
ATM-100120Development of Dryer designs in different dimensions suitable for different dehumidification capacity needs12.202103.2025
ATM-100121Realization of two different condenser designs for display freezer cabinets to operate two different motor groups simultaneously by testing with different models and brands12.202103.2025
ATM-100122Product design in alternative dimensions and materials for pastry cabinets12.202103.2025
ATM-100123Transforming the Condenser Groups Used in Sherbet and Dispenser Type Machines into a Smaller and More Compact Design12.202412.2026
ATM-100124More Effective Product Design Using 35x35 – 3/8" or 31.75x27.5 – 1/2" Products Instead of Products with 60x30 – 5/8" – 1/2" and 40x34.64 – 5/8" –1/2" Tube Geometry Used in Vertical and Horizontal Freezer Aisles and Cabinets12.202412.2026
ATM-1001252 O-ring Flare Model in Cooling Sector12.202412.2026
ATM-100127Battery Internal Cleaning and Blockage Test Setup12.202412.2026
ATM-100126Staggered Series Condenser12.202412.2026
ATM-100128Capillary Product Development12.202412.2026
Intellectual Property

Industrial Property Rights

Inventions developed and registered in-house.

10Registered Inventions
2007First Registration Year
1Commercialized Worldwide
YearRegistration NoInvention Title
20078522Multi-Piece Condenser
20071653Parallel Connected Dust-Free Condenser
20083279Plate Condenser
201214679No-Frost Evaporator Manufactured with Multi-Channel Tube and Manufacturing Method
201415706Wire Condenser Containing Elliptical Tube and Production Method
20146001Intermittent Heat Transfer Element Array and Heat Exchanger
20143229Horizontally Positioned Multi-Channel Tubular Heat Exchangers and Manufacturing Method
20143228Vertically Positioned Multi-Channel Tubular Heat Exchangers and Manufacturing Method
20152893Series-Connected Staggered Heat Exchanger and Manufacturing Method
20188619High Efficiency Wire Condenser

Let's collaborate on your project

We produce permanent solutions to your technical problems.

Contact UsExplore Products